Brewcommune

When I started with Corney kegs, I bought every used beatup old one I could find. They all cleaned up fine, and with new o-rings, were perfect! Since then, when I have found group deals on new kegs, I've bought them, and they do vary in configuration & quality, but they all work. Bottom line, c...

Clean and spear has been removed
Safer than glass carboy
Make an offer...$30 and some tasty brew???

The Brun Water spreadsheet seems very cumbersome
Then I found this a few years ago
http://ezwatercalculator.com/
Free and you can edit as needed unlike Brun Water
Noticed several cells showing #DIV by 0 so edited them to show "0"
Need a copy? PM me

ps: Much easier to use...only one page

6 tap bodies
3 tap handles
Similar to pic
Near So Coast Plaza

Self tapping sheet metal screws will work...just check door to make sure no coolant lined run thru it

Hello everyone
Good news...NO BS...
Scott at Windsor advised the shipment of Beer Stone Remover has arrived
Thanks Scott

Bump
Anyone interested?

Anyone interested in this cooler?
Dan Hempy gave to me a few years ago
Works very well
Are you a paid member? Then it is free to you
Currently sitting in Santa Ana
PM me for details
Chris

You are correct...the PVC will butt up to the inside of metal skin on door. However the backing nut and washer must be on inside of the plastic (facing fridge interior) and black or stainless collar on outside of the metal door This will allow the backing nut to be tightened up without distorting pl...

All the bottles were snatched up at the meeting. I would be interested to get feedback once you guys have a chance to use it. I probably won't order another case unless Windsor has trouble getting it in stock. I checked with Scott this week...product is still not available. He will post here when s...

You can use a slightly larger schedule 40+ PVC to make spacers to go through the insulation. Just make sure it's larger than the shank hole in the metal. Use a larger diameter hole saw on the back side to make room for your PVC spacers. +1 Also use a large washer or similar item to spread out the l...

Good news...sent to Windsor yesterday and Scott will order two cases once available
Look for his post here when product arrives

Nice write up Brad...I also agree with not being cheap
PBW does a great job when used as directed
Especially when used with hot water and CIP
Did rep say when BS Remover will be available?

Yes I know what day it was

Details please...