For Sale

This is an open forum to discuss all things that just might be on your mind.

Moderators: Post Moderators, Cheers Moderator

Post Reply
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

For Sale

Post by lexuschris »

Hey All,

I'm clearing out some stuff in preparation for my move. The following items are available until I label them 'Sold'. I'm willing to take best offers too, so PM me if you are at all interested! I would rather see these go to someone who appreciates them. :)

Thanks,
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale - Barbarian Sword

Post by lexuschris »

This is a decorative sword, I believe from Marto Swords circa 1999. The edge is not a true edge, so it is quite safe for handling. However, it is heavy and not meant for artistic swordplay. The artwork in the hilt, pommel & quillions is amazing!

Image

Image

The chains hold in 2 daggers, one on each side, which can be removed!

Image

New these run about $700. Would love to see it go for $100 or best offer. I'll also throw in some cool sword mounts for the wall!
:happybeer:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

This is another decorative sword from Marto Swords circa 1999. The edge is not a true edge, so it is quite safe for handling. However, it is heavy and not meant for artistic swordplay.

The artwork in the hilt, pommel & quillions depicts the four horsemen of the Apocolypse!

Image

Image

New this would be $800, but I would love to see it go for $100 to somebody here. I'll also through in some cool sword wall mounts!
:cheers:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Coor's Sanke Keg

Image

+ 15 gallon sanke keg
+ center spire removed
+ dent on side
+ suitable for conversion to keggle brew vessel
+ not recommended for fermentation kit

Price: 1 bottle of homebrew
K:-)
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Miller's Sanke keg

Image

+ 15 gallon sanke keg
+ center spire removed
+ clean inside, flat sides
+ suitable for fermenter kit, or keggle

Price: 1 bottle of Homebrew
K:-)
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Boil Kettle

Image

+ suitable for 2.5 gallon boils
+ used for 5 gallon extract/ partial mash, with 2.5 gal boils, and 2.5 gallon water addition to fermenter
+ would make a good chili/stock pot too
+ lid included has small adjustable steam vent too

Price: 1 bottle of homebrew
:cheers:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Hop screen

Image

+ stainless steel screen with top cover
+ add hops to screened column and drop into your boil kettle
+ keeps hops out of fermenter, pumps, etc.

Price: 1 bottle of homebrew
:beer: :beer: :beer: :beer:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Stainless Steel Wort Chiller w/tri-clover inlets

Image

I was hoping to build something cool with this, but never got around to it. Uses standard size tri-clover clamps like you can get at BrewersHardware.com.

Yours for a bottle of homebrew! -- SOLD --
:happybeer:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Whirlpool Refridgerator --SOLD--

Image

Image

Image

Image

Image

This fridge is 19 years old, but still keeps things very cold, and has wire frame shelving, making this ideal for a kegerator conversion, or temperature controlled fermenter. Also makes a great beer fridge (as shown) for the garage, and can easily fit a couple racks of baby back ribs in the freezer!

PM me if you want it and have means to pick it up and take it! --SOLD--
:cheers:
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
SamIam
Posts: 347
Joined: Tue Jul 19, 2011 10:56 am
Location: Westminster

Re: For Sale

Post by SamIam »

lexuschris wrote:Stainless Steel Wort Chiller w/tri-clover inlets

Image

I was hoping to build something cool with this, but never got around to it. Uses standard size tri-clover clamps like you can get at BrewersHardware.com.

Yours for a bottle of homebrew!
:happybeer:
--LexusChris
Hey Chris, I'll take it, if it's not claimed yet. Thanks!
"I feel sorry for people who don't drink. When they wake up in the morning, that's as good as they're going to feel all day!"
~Frank Sinatra
User avatar
lexuschris
Posts: 2108
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: For Sale

Post by lexuschris »

Still have some items left, and the prices are AMAZING!!!!

K:-)
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
Post Reply