what went wrong with my stout?

Share recipes here and discuss recipes posted in the recipe database.

Moderator: Post Moderators

Post Reply
User avatar
nico soze
Posts: 316
Joined: Thu Jan 27, 2011 3:41 pm

what went wrong with my stout?

Post by nico soze »

5 gallon batch
3 lbs light dme
3 lbs amber dme
1 lb pale chocolate malt
1 lb midnight wheat
.5lb rolled oat
.5lb crystal 120
1 oz magnum @ 60min
1 whirlfloc 15
5tsp yeast nutrient 10
.75 lb malto dextrin 10
1 full abuelita coin (5min) (cocoa + sugar=abuelita)
safale05
4oz cocao nibs secndary

For those of you who tasted my taint last night, HOW did this recipe turn into what I was serving? How was it not thick and rich and creamy and dark?
User avatar
backyard brewer
Posts: 3774
Joined: Fri Feb 18, 2005 5:38 pm
Location: Orange County, CA
Contact:

Re: what went wrong with my stout?

Post by backyard brewer »

I wasn't there to taste it, but wheat and oats should be mashed. They won't contribute anything but starch haze when steeped.
User avatar
3rdto1st
Posts: 130
Joined: Tue Oct 11, 2011 3:42 pm

Re: what went wrong with my stout?

Post by 3rdto1st »

Could you point me to a good definition of steeped vs mashed? I think I may have made this problem with my stout as well.
Brewing soon: KtG
Primary :
Secondary: Sucaba clone (on oak soaked in EC12)
Kegs: Kate the just OK, English SMASH

Gals brewed '11: 50
Gals brewed '12: 50
User avatar
bwarbiany
Posts: 2290
Joined: Fri Dec 14, 2007 10:49 pm
Location: Mission Viejo, CA

Re: what went wrong with my stout?

Post by bwarbiany »

3rdto1st wrote:Could you point me to a good definition of steeped vs mashed? I think I may have made this problem with my stout as well.
If you're doing BIAB, and using *any* base malt with diastatic power (2-row, pilsner, etc), then you're mashing. If you're only putting specialty malt into a pot without any base malt, you're steeping.

Crystal malts can be steeped -- I believe the kilning process basically converts the starches into sugars (someone correct me if I'm wrong here). Other malts that are unconverted and don't have any of their own diastatic power (i.e. enough of or the right kind of enzymes to convert their starches to sugars) require that you add malts that have sufficient diastatic power -- i.e. you need to mash.

But if you're doing BIAB, this isn't your problem with a stout.
Brad
User avatar
nico soze
Posts: 316
Joined: Thu Jan 27, 2011 3:41 pm

Re: what went wrong with my stout?

Post by nico soze »

I was figuring that the midnight wheat would get me black just from steeping, and the malto would thicken and sweeten But I ended up with a brown thin dry beer.
User avatar
3rdto1st
Posts: 130
Joined: Tue Oct 11, 2011 3:42 pm

Re: what went wrong with my stout?

Post by 3rdto1st »

I got all the stuff about diastatic power, I just didn't know it was the difference between mashing and steeping. Little bit of an OT question, but why would you steep?
Brewing soon: KtG
Primary :
Secondary: Sucaba clone (on oak soaked in EC12)
Kegs: Kate the just OK, English SMASH

Gals brewed '11: 50
Gals brewed '12: 50
User avatar
jward
Posts: 2103
Joined: Mon Feb 21, 2005 10:22 pm
Location: Irvine, CA
Contact:

Re: what went wrong with my stout?

Post by jward »

3rdto1st wrote:why would you steep?
If one is making an extract beer steeping can add charater from the steeped grains. If you are mashing they go in the mash, no point in steeping.

Nick, did you mill the grain? Was it well crushed? You might crush your darkest malt in a coffee grinder to increase the extraction.
Image
User avatar
bwarbiany
Posts: 2290
Joined: Fri Dec 14, 2007 10:49 pm
Location: Mission Viejo, CA

Re: what went wrong with my stout?

Post by bwarbiany »

Here's a good explanation in Palmer about steeping:

http://www.howtobrew.com/section2/chapter13-2.html

You do actually extract sugars from the grains that can be steeped, but as you can see there are several malts that are not able to be steeped.
Brad
User avatar
nico soze
Posts: 316
Joined: Thu Jan 27, 2011 3:41 pm

Re: what went wrong with my stout?

Post by nico soze »

It was milled all together in Eric's old 2 roller mill except the oats which I just added whole And steeped at 152 for an hour And then "dunk sparged" many times.
User avatar
lexuschris
Posts: 2118
Joined: Sat Apr 25, 2009 7:08 pm
Location: Corona del Mar, CA
Contact:

Re: what went wrong with my stout?

Post by lexuschris »

Steeping is just soaking specialty malts in hot water to extract the carmelized sugars and color.

Mashing requires enzymes from malted base-malts (diastatic power rates their enzyme level) at specific tempratures for an amount of time to convert the starches in the grain to fermentable & non-fermentable dextrins.

Mini-mash is just when you do a small portion of base-malt & specialty malts at the right temprature & time, and the rest being DME/LME.

For stouts, I've always thought that roasted barley is an important part of the recipe... but I think it might depend on the stout sub-style as well as personal preferences.

Wish I had been there to give it a taste for some better feedback. :)
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
User avatar
BrewMasterBrad
Pro Brewer
Posts: 3326
Joined: Thu Feb 09, 2006 12:31 pm
Location: Skyland Ale Works, Corona, CA
Contact:

Re: what went wrong with my stout?

Post by BrewMasterBrad »

Black patent has always been a key ingredient in my stouts. I agree with the others that the wheat and oats are not much use in an extract beer since they must be mashed to be converted.

Did you really use 5tsp of yeast nutrient in five gallons? I don't know what yeast nutrient you are using, but that seems excessive. I use have used White Labs and Wyeast and both of those, I believe, suggest a half teaspoon per 5 gallons.
I saw a werewolf drinking a pina colada down at Trader Vic's
JonW
Site Admin
Posts: 1163
Joined: Sat Jan 23, 2010 12:21 am
Location: Huntington Beach, CA
Contact:

Re: what went wrong with my stout?

Post by JonW »

It's probably the Crosby & Baker stuff. I bought that once when I was out of the Wyeast nutrient and I didn't read the dosing instructions until I was ready to use it. Needless to say, I was not about to put 10 tsp into my 10 gallon batch! I don't remember how much I put in, but I threw the stuff away after that one batch.
User avatar
bwarbiany
Posts: 2290
Joined: Fri Dec 14, 2007 10:49 pm
Location: Mission Viejo, CA

Re: what went wrong with my stout?

Post by bwarbiany »

backyard brewer wrote:I wasn't there to taste it, but wheat and oats should be mashed. They won't contribute anything but starch haze when steeped.
I just looked at the Briess pdf for Midnight Wheat, and it's in the 550L range. That's plenty dark. Does it really need to be mashed, or does it follow the same sort of logic as the kilned barley malts (Crystal, Roasted, Black Patent etc) that can simply be steeped. Obviously the oats still need to be mashed, but at only .5#, I doubt we can call a lack of mashing the issue with this recipe.

The notes from Briess suggest that it's a replacement for debittered black malt -- so while I might not like it for a stout (because I like the big roast flavor), it should definitely get a beer to a pretty dark color. A pound of 550L coupled with a pound of 200L pale chocolate in 5 gallons should get you to a full on black beer.
Brad
User avatar
bwarbiany
Posts: 2290
Joined: Fri Dec 14, 2007 10:49 pm
Location: Mission Viejo, CA

Re: what went wrong with my stout?

Post by bwarbiany »

nico soze wrote: safale05

For those of you who tasted my taint last night, HOW did this recipe turn into what I was serving? How was it not thick and rich and creamy and dark?
Safale US-05 is a beast. It will attenuate VERY strongly. Did you measure OG and FG?

What temp did you pitch? What temp did you ferment it at?

I attributed many of the problems with most of my early beers (thin and lacking body) to be related to fermentation temp issues -- pitching too hot and fermenting too hot. Couple that with a beast of a yeast like US-05, and you might have your problem.
Brad
User avatar
nico soze
Posts: 316
Joined: Thu Jan 27, 2011 3:41 pm

Re: what went wrong with my stout?

Post by nico soze »

Yes Crosby and Baker. Its the only one Ive ever used. Not sure about ferm temp but warm. Low to mid 70s. Ferm chamber is my current project
Post Reply