The following video shows the Barley Mill that Eric and I came up with to use in his store. Next time you visit Addison Homebrew Provisions, check it out.
The motor is 1/3 hp and the pulleys gear down to rotate the mill at 500 RPM. This will crush the grain at about 6 lbs. per minute.
http://www.youtube.com/backhousebrew#p/u/6/AVH4ypeQiTQ
The high def video was shot, edited and narrated by Unruly Fellows Video Production.
http://unrulyfellows.com/
If you're thinking about building a mill, let me know if you have any questions about where to buy the parts.
Motorized Barley Mill
Moderator: Post Moderators
-
backhousebrew
- Posts: 476
- Joined: Tue Nov 17, 2009 8:20 am
- Location: Tustin
Motorized Barley Mill
Drink Good Beer!
-
maltbarley
- Posts: 2408
- Joined: Thu Dec 08, 2005 9:31 am
- Location: Orange, CA
Re: Motorized Barley Mill
Nice work, Don!
Re: Motorized Barley Mill
Nice job...can you post the parts list etc?
Chris aka Dr Dually
drdually@att.net
Life is tough. It is even tougher when you are stupid. John Wayne
Bottled and enjoying: Nada, zip
Kegged: English Brown, American Amber, Double Barrel Ale
Next up: Kolsch
drdually@att.net
Life is tough. It is even tougher when you are stupid. John Wayne
Bottled and enjoying: Nada, zip
Kegged: English Brown, American Amber, Double Barrel Ale
Next up: Kolsch
-
backhousebrew
- Posts: 476
- Joined: Tue Nov 17, 2009 8:20 am
- Location: Tustin
Re: Motorized Barley Mill
BackHouseBrew Grain Mill part listDrDually wrote:Nice job...can you post the parts list etc?
TV cabinet - Craigslist
Casters - HomeDepot
Barley Crusher – Addison Homebrew Provisions
Dayton 1/3hp Electric Motor 5K917BA – Grainger
Pulleys, 7” and 2” w/ ½” shafts - Grainger
1 –1/2” to 3/8” shaft reducer sleeve – Grainger
1x8 pine pulley enclosure and two wire screen foundation vents – HDepot
Funnel: 1 sheet metal FAU register box 4”x8” - HDepot
2 outdoor electrical boxes, 1 ½” EMT conduit, 2 EMT ½” connectors, 1 GFI plug, 1 on/off switch 1 outdoor switch cover plate, 5 ft. 12ga rubber extension cord, wire nuts, 1 plug end, misc nuts, bolts and screws – HDepot
Drink Good Beer!
-
JonW
- Site Admin
- Posts: 1163
- Joined: Sat Jan 23, 2010 12:21 am
- Location: Huntington Beach, CA
- Contact:
Re: Motorized Barley Mill
This is sweet! Nice job! 
-
lexuschris
- Posts: 2129
- Joined: Sat Apr 25, 2009 7:08 pm
- Location: Corona del Mar, CA
- Contact:
Re: Motorized Barley Mill
Love it! I want one! 
--LexusChris
--LexusChris
"A woman drove me to drink, and I hadn't even the courtesy to thank her." – W.C. Fields
Re: Motorized Barley Mill
SWEET!!!
Re: Motorized Barley Mill
Great job Don. That is a classy looking unit!
Dan
Dan
-
StarRaptor
- Posts: 204
- Joined: Sat Jul 17, 2010 8:18 am
- Location: Orange, CA
Re: Motorized Barley Mill
very nice, I got to use it on Saturday for my latest brew...
-
backyard brewer
- Posts: 3774
- Joined: Fri Feb 18, 2005 5:38 pm
- Location: Orange County, CA
- Contact:
Become a Brewer's Hardware Fan on Facebook!
Re: Motorized Barley Mill
Love the commentator. Was waiting for the standard, "If you call in now, we'll throw in yet another Motorized Barley Mill, and not only that, we'll also throw in this revolutionary pet hair removal glove" or something like that.
Awesome video!
Awesome video!
Last edited by JonGoku on Wed Sep 29, 2010 8:59 am, edited 1 time in total.
Jon 
Re: Motorized Barley Mill
Very nice. I saw it earlier this week at the shop. Nice work Don!
I have not yet begun to defile myself.
-
backhousebrew
- Posts: 476
- Joined: Tue Nov 17, 2009 8:20 am
- Location: Tustin
Re: Motorized Barley Mill
Thanks for the "thumbs up" and the comments.
It was a fun project. I hope Eric gets a lot of use out of it.
It was a fun project. I hope Eric gets a lot of use out of it.
Drink Good Beer!
Re: Motorized Barley Mill
It is a great mill. Very fast. Thanks Don.backhousebrew wrote:Thanks for the "thumbs up" and the comments.
It was a fun project. I hope Eric gets a lot of use out of it.
An intelligent man is sometimes forced to be drunk with his fools. - Hemingway
Re: Motorized Barley Mill
I was late to this game. Where did the video go?backhousebrew wrote:The following video shows the Barley Mill that Eric and I came up with to use in his store.
http://www.youtube.com/backhousebrew#p/u/6/AVH4ypeQiTQ
Luke
MetaBrewing - A homebrewing blog documenting experiments with equipment, processes, recipes, hops, wild yeast, and whatever else happens to sneak its way in.
MetaBrewing - A homebrewing blog documenting experiments with equipment, processes, recipes, hops, wild yeast, and whatever else happens to sneak its way in.