10" low pressure burners
Moderator: Post Moderators
-
backyard brewer
- Posts: 3774
- Joined: Fri Feb 18, 2005 5:38 pm
- Location: Orange County, CA
- Contact:
10" low pressure burners
I realized I didn't let anyone here know, but I've got 10" low pressure burners in stock along with both LPG & NG orifice valves. These are designed for 11" WC pressure, so if you run LPG, you'd need a reg for 11" WC (which I also have)
Become a Brewer's Hardware Fan on Facebook!-
backhousebrew
- Posts: 476
- Joined: Tue Nov 17, 2009 8:20 am
- Location: Tustin
Re: 10" low pressure burners
backyard brewer wrote:I realized I didn't let anyone here know, but I've got 10" low pressure burners in stock along with both LPG & NG orifice valves. These are designed for 11" WC pressure, so if you run LPG, you'd need a reg for 11" WC (which I also have)
I would like to use these on my next BrewStove.
If I use NG, what size thread goes into the end of the burner?
Drink Good Beer!
-
backyard brewer
- Posts: 3774
- Joined: Fri Feb 18, 2005 5:38 pm
- Location: Orange County, CA
- Contact:
Re: 10" low pressure burners
You need the NG valve orifice. It threads directly into the burner and has a 3/8" male flare fitting for the inlet.backhousebrew wrote:I would like to use these on my next BrewStove.
If I use NG, what size thread goes into the end of the burner?
