Burner question

Oh yes! Everything you ever wanted to know about equipment or ask about equipment, this is the place to be! Share photos or ideas about equipment here.

Moderator: Post Moderators

Post Reply
User avatar
ArrogantDan
Posts: 160
Joined: Tue May 04, 2010 1:19 pm
Location: Yorba Linda

Burner question

Post by ArrogantDan »

I'm looking to get a couple of new burners for my system (low pressure propane). I'm leaning towards the Bayou Classic BG14 which is a 10 inch burner with air shutter. Does anybody have experience with this burner or opinions?
User avatar
brahn
Site Admin
Posts: 1799
Joined: Wed May 31, 2006 5:12 pm
Location: Tustin, CA
Contact:

Re: Burner question

Post by brahn »

I've heard great things about the banjo burner but I haven't used one.
User avatar
backyard brewer
Posts: 3774
Joined: Fri Feb 18, 2005 5:38 pm
Location: Orange County, CA
Contact:

Re: Burner question

Post by backyard brewer »

I like them. They do need to be allowed to breathe well and are susceptible to being choked out if your stand design traps too much of the exhaust under the kettle. They are very quite, you can barely hear them. I carry the same basic design although not Bayou brand. I also have the orfices with vavles for both LPG and NG. http://www.brewershardware.com/10-Low-P ... urner.html

They're still out of stock but due any day.
User avatar
ArrogantDan
Posts: 160
Joined: Tue May 04, 2010 1:19 pm
Location: Yorba Linda

Re: Burner question

Post by ArrogantDan »

Thanks for the input. I'm gonna go ahead and order them from you Derrin when you get them in stock. I'll also want to get the heat shields and orifices too. Just let me know when you have them...
Post Reply